EN ISO 17078-1:2005 – Petroleum and natural gas industries – Drilling and production equipment – Part 1: Side-pocket mandrels
1 Scope
This part of ISO 17078 provides requirements for side-pocket mandrels used in the petroleum and natural gas industry. This part of ISO 17078 includes specifying, selecting, designing, manufacturing, quality control,testing, and preparation for shipping of side-pocket mandrels.
This part of ISO 17078 does not address nor include requirements for end connections between the sidepocket mandrels and the well conduit. The installation and retrieval of side-pocket mandrels is outside the scope of this part of ISO 17078. Additionally, this part of ISO 17078 does not include specifications for centreset mandrels, or mandrels that employ or support tubing-retrievable flow control devices.
This part of ISO 17078 does not include gas-lift or any other flow-control valves or devices, latches, and/or associated wire line equipment that can or cannot be covered in other ISO specifications.
The side-pocket mandrels to which this part of ISO 17078 refers are independent devices that can accept installation of flow-control or other devices down-hole.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 6506-1, Metallic materials — Brinell hardness test — Part 1: Test method
ISO 6508-1, Metallic materials — Rockwell hardness test — Part 1: Test method (Scales A, B, C, D, E, F, G,H, K, N, T)
ISO 6892, Metallic materials — Tensile testing at ambient temperature
ISO 9000:2000, Quality management systems — Fundamentals and vocabulary
ISO 9712, Non-destructive testing — Qualification and certification of personnel
ISO 11960:2001, Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
ISO 15156-1, Petroleum and natural gas industries — Materials for use in H 2 S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials
ISO 15156-2, Petroleum and natural gas industries — Materials for use in H 2 S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons
ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications
ASTM E94, Standard Guide for Radiographic Examination 3)
ASTM E140, Standard Hardness Conversion Tables for Metals
ASTM E165, Standard Test Method for Liquid Penetrant Examination
ASTM E709, Standard Guide for Magnetic Particle Examination
BS 2M 54:1991, Specification for temperature control in the heat treatment of metals 4)
SAE AMS-H-6875:1998, Heat Treatment of Steel Raw Materials
3 Terms and definitions
For the purpose of this document, the terms and definitions given in ISO 9000:2000 and the following apply.
3.1
acceptance
agreement/acknowledgement that side-pocket mandrel component(s) and/or assembly(ies) can be used without restriction
3.2
certificate of conformance
documentation declaring that a specific side-pocket mandrel meets the requirements of this part of ISO 17078 and the requirements of the functional specification
EN ISO 17078-1:2005 – Petroleum and natural gas industries – Drilling and production equipment – Part 1: Side-pocket mandrels