EN 15200:2007 – Sanitary appliances – Multifunction shower cabinets
1 Scope
This standard specifies requirements and test methods for multifunction shower cabinets (subsequently referred to as unit(s)), used for domestic purposes.
This standard does not apply to shower cabinets and shower enclosures.
NOTE For the purposes of this standard the term “domestic purposes” includes use in hotels, accommodation for students and similar buildings, except when special provisions e. g. medical, are required.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenceddocument (including any amendments) applies.
EN 198:1987, Specification for finished baths for domestic purposes made of acrylic material
EN 200, Sanitary tapware – Single taps and combination taps (PN 10) – General technical specification
EN 232, Baths — Connecting dimensions
EN 251, Shower trays — Connecting dimensions
EN 274-1, Waste fittings for sanitary appliances – Part 1: Requirements
EN 817, Sanitary tapware — Mechanical mixers (PN 10) – General technical specifications
EN 1111, Sanitary tapware — Thermostatic mixing valves (PN 10) – General technical specification
EN 1112, Shower outlets for (PN 10) sanitary tapware
EN 1113, Shower hoses for (PN 10) sanitary tapware
EN 1286, Sanitary tapware – Low pressure mechanical mixing valves – General technical specification
EN 1287, Sanitary tapware – Low pressure thermostatic mixing valves – General technical specifications
EN 1717, Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
EN 12373-1, Aluminium and aluminium alloys – Anodizing – Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium
EN 12764, Sanitary appliances — Specification for whirlpool baths
prEN 13618-1, Hose assembly – Flexible hose assembly – Part 1: Product standard for flexible hose assembly (with or without braiding)
prEN 13618-2, Water supply – Hose assembly – Part 2: Semi-rigid hose assembly
EN 13904, Low resistance shower outlets for sanitary tapware
EN 13905, Low resistance shower hoses for sanitary tapware
EN 14428:2004, Shower enclosures — Functional requirements and test methods
3 Terms and Definitions For the purposes of this document, the following terms and definitions apply.
3.1 multifunction shower cabinet prefabricated but not necessarily pre-assembled independent unit, comprised of a base (shower tray or bath), rigid enclosed wall(s), with or without a roof and an entry, capable of being closed to provide a watertight compartment incorporating a showering function (mixing valve, shower head etc.) and at least one other function (e.g. steam bath, hydraulic massage, UV radiation)
3.2 shower cabinet prefabricated but not necessarily pre-assembled independent unit, comprised of a base (shower tray or bath), rigid enclosed wall(s), with or without a roof and an entry, capable of being closed to provide a watertight compartment that incorporates a showering function (mixing valve, shower head etc.)
3.3 shower enclosure arrangement of fixed or hinged panel(s) and/or door(s) erected on or around a drained shower place, shower tray or bath in conjunction with one or more walls of a building to provide a water retaining area for showering
EN 15200:2007 – Sanitary appliances – Multifunction shower cabinets