EN 14600:2005 – Doorsets and openable windows with fire resisting and/or smoke control characteristics – Requirements and classification
1 Scope
This European Standard identifies the particular requirements and classifications necessary to demonstrate the characteristics of fire resistance, smoke leakage control and self closing durability for pedestrian doorsets,industrial type doorsets and openable windows.
Requirements for performance characteristics for these products can be found in the appropriate product standards.
This document does not cover any component reliability or durability testing of mechanical heat detectors (e.g.fusible link devices).
The requirements relating to the use of alternative items of building hardware are provided.
NOTE 1 Fire resistance of doorsets and fire resistance of openable windows and smoke control of doorsets which differ from the original test specimen(s) are covered by the fields of direct and extended application relative to the result of test(s) to EN 1634-1 for fire resistance and EN 1634-3 for smoke control.
NOTE 2 Smoke venting windows designed to open in the event of fire are not covered by this standard.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 179, Building hardware – Emergency exit devices operated by a lever handle or push pad – Requirements and test methods
EN 572-9:2004, Glass in building – Basic soda lime silicate glass products – Part 9: Evaluation of conformity/Product standard
EN 1096-4:2004, Glass in building – Coated glass – Part 4: Evaluation of conformity/Product standard
EN 1125, Building hardware – Panic exit devices operated by a horizontal bar – Requirements and test methods
EN 1154, Building hardware – Controlled door closing devices – Requirements and test methods
EN 1155, Building hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods
EN 1158, Building hardware – Door coordinator devices – Requirements and test methods
EN 1191, Windows and doors – Resistance to repeated opening and closing – Test method
EN 1279-5:2001, Glass in building – Insulating glass units – Part 5: Evaluation of conformity
EN 1303, Building hardware – Cylinders for locks – Requirements and test methods
EN 1364-1, Fire resistance tests for non-loadbearing elements – Part 1: Walls
EN 1527, Building hardware –Hardware for sliding doors and folding doors – Requirements and test methods
EN 1634-1, Fire resistance tests for door and shutter assemblies – Part 1: Fire doors and shutters prEN 1634-2, Fire resistance tests for door and shutter assemblies – Part 2: Fire door hardware – Building hardware for fire resisting doorsets and openable windows
EN 1634-3, Fire resistance tests for door and shutter assemblies – Part 3: Smoke control doors and shutters
EN 14600:2005 – Doorsets and openable windows with fire resisting and/or smoke control characteristics – Requirements and classification