BS EN 60384-24-1:2006 – Fixed capacitors for use in electronic equipment — Part 24-1: Blank detail specification — Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte — Assessment level EZ
1 .4 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60384-1 :1 999, Fixed capacitors for use in electronic equipment – Part 1: Generic specification
IEC 60384-24:2006, Fixed capacitors for use in electronic equipment – Part 24: Sectional
specification – Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
1 .5 Marking
The marking of the capacitor and the package shall be in accordance with the requirements of 1 .6 of IEC 60384-24.
NOTE The details of the marking of the component and package should be given in full in the detail specification.
1 .6 Ordering information
Orders for capacitors covered by this specification shall contain, in clear or in coded form, the following minimum information:
a) rated capacitance;
b) tolerance on rated capacitance;
c) rated d.c. voltage;
d) number and issue reference of the detail specification and style reference;
e) packaging instructions.
1 .7 Certified records of released lots
Required/not required.
1 .8 Additional information (not for inspection purposes)
1 .9 Additional or increased severities or requirements to those specified in the generic and/or sectional specification
NOTE Additions or increased requirements should be specified only when essential.
Table 4 – Other characteristics
This table is to be used for defining characteristics which are additional to,or more severe than, those given in the sectional specification.
2 Inspection requirements
2.1 Procedures
2.1 .1 For qualification approval, the procedures shall be in accordance with 3.4 of IEC 60384-24.
2.1 .2 For quality conformance inspection, the test schedule (Table 5) includes sampling,periodicity, severities and requirements. The formation of inspection lots is covered by 3.5.1 of IEC 60384-24.
BS EN 60384-24-1:2006 – Fixed capacitors for use in electronic equipment — Part 24-1: Blank detail specification — Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte — Assessment level EZ