BS EN 14227-10:2006 – Hydraulically bound mixtures — Specifications — Part 10: Soil treated by cement
1 Scope
This European Standard specifies soil treated by cement for the pavement layers of roads, airfields and other trafficked areas and specifies the requirements for its constituents, composition and laboratory performance classification. It provides for the use of aggregates with grading curves, which are not constrained by the limits
defined in EN 1 4227-1 for cement bound granular mixtures.
This European Standard does not specify requirements for strength prior to trafficking or frost resistance,which might be covered by requirements at the place of use.
Production control recommendations are included in the informative Annex B.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1 97-1 , Cement — Part 1: Composition, specifications and conformity criteria for common cements
EN 1 97-4, Cement — Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
EN 933-1 , Test for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Sieving method
EN 1 008, Mixing water for concrete — Specifications for sampling, testing and assessing the suitability of
water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 1 3286-1 , Unbound and hydraulically bound mixtures — Part 1: Test methods for laboratory reference den- sity and water content — Introduction, general requirements and sampling
EN 1 3286-2, Unbound and hydraulically bound mixtures — Part 2: Test methods for the determination of the laboratory reference density and water content — Proctor compaction
EN 1 3286-3, Unbound and hydraulically bound mixtures — Part 3: Test methods for laboratory reference den-sity and water content — Vibrocompression with controlled parameters
EN 1 3286-4, Unbound and hydraulically bound mixtures — Part 4: Test methods for laboratory reference den-sity and water content — Vibrating hammer
EN 1 3286-5, Unbound and hydraulically bound mixtures — Part 5: Test methods for laboratory reference den-sity and water content — Vibrating table
EN 1 3286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
EN 1 3286-41 , Unbound and hydraulically bound mixtures — Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 1 3286-42, Unbound and hydraulically bound mixtures — Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
EN 1 3286-43, Unbound and hydraulically bound mixtures — Part 43: Test methods for the determination of the modulus of elasticity of hydraulically bound mixtures
BS EN 14227-10:2006 – Hydraulically bound mixtures — Specifications — Part 10: Soil treated by cement