BS EN 14156:2003 – Derivatives from coal pyrolysis — Coal tar based oils: Coal tar fuel — Specifications and test methods

BS EN 14156:2003 - Derivatives from coal pyrolysis — Coal tar based oils: Coal tar fuel — Specifications and test methods

1 Scope
This European Standard gives the specifications of and the test methods for liquid fuels derived from coal tar. The specifications also apply to shale oil, aromatic mineral oils, and lignite tar.
Preheating of liquid fuel oils according to this standard can be necessary for transport, storage, and combustion.
The mixing with fuel oils from other raw materials should be avoided.
This standard does not cover marine fuel applications.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments).
EN 1014-1, Wood preservatives – Creosote and creosoted timber – Methods of sampling and analysis – Part 1 : Procedure for sampling creosote.
EN 12303:2000, Coal tar based oils – Terminology.
prEN 13991, Derivatives from coal pyrolysis – Coal tar based oils: creosotes – Specifications and test methods.
EN 24260, Petroleum products and hydrocarbons – Determination of sulfur content – Wickbold combustion method) (ISO 4260:1987).
EN ISO 2719, Determination of flash point – Pensky-Martens closed cup method (ISO 2719:2002).
EN ISO 3675, Crude petroleum and liquid petroleum products – Laboratory determination of density – Hydrometer method (ISO 3675:1998).
EN ISO 6245, Petroleum products – Determination of ash (ISO 6245:2001).
EN ISO 10370, Petroleum products – Determination of carbon residue – Micro method (ISO 10370:1993).
EN ISO 14596, Petroleum products – Determination of sulfur content – Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:1998).
ISO 760, Determination of water – Karl Fischer method (General method).
ISO 3733, Petroleum products and bituminous materials – Determination of water – Distillation method.
DIN 51550, Viscometry – Determination of viscosity – General principles.
DIN 51900-1, Testing of solid and liquid fuels – Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value – Part 1 : Principles, apparatus, methods (Remark : Draft 06.1998 based on ISO 1928).
DIN 51900-2, Testing of solid and liquid fuels – Determination of the gross calorific value by the bomb calorimeter
and calculation of net calorific value – Part 2 : Method using the isothermal water jacket calorimeter.
DIN 53018-1, Viscometry – Measurement of the dynamic viscosity of Newtonian fluids with Rotational Viscometers – Principles.
BS EN 14156:2003 – Derivatives from coal pyrolysis — Coal tar based oils: Coal tar fuel — Specifications and test methods

Leave a Reply

Your email address will not be published. Required fields are marked *