www.freestandardsdocuments.com collects the introduction about EN standards.The information will give you some guidance, remember to support my website.

BS EN 13920-13:2003 – Aluminium and aluminium alloys — Scrap — Part 13: Mixed turnings consisting of two or more alloys

BS EN 13920-13:2003 - Aluminium and aluminium alloys — Scrap — Part 13: Mixed turnings consisting of two or more alloys

1 Scope This European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap in the form of turnings consisting of two or more alloys. EXAMPLE Scalpings, millings, borings from plates, extruded profiles, castings etc. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate […]

Continue reading »

BS EN 13920-14:2003 – Aluminium and aluminium alloys — Scrap — Part 14: Scrap from post-consumer aluminium packagings

BS EN 13920-14:2003 - Aluminium and aluminium alloys — Scrap — Part 14: Scrap from post-consumer aluminium packagings

1 Scope This European Standard specifies characteristics, form, chemical composition and metal yield of scrap consisting of a mixture of used aluminium packagings. This mixture includes aluminium foil laminated with paper or plastics having a metal yield less than 28 %. EXAMPLE Mix of pet food containers and lids, food cans, semi-rigid containers such as those used for catering, domestic […]

Continue reading »

BS EN 14073-3:2004 – Office furniture — Storage furniture — Part 3: Test methods for the determination of stability and strength of the structure

BS EN 14073-3:2004 - Office furniture — Storage furniture — Part 3: Test methods for the determination of stability and strength of the structure

1 Scope This document specifies test methods for the determination of strength of the structure of free standing or screen and wall hanging office storage furniture as well as stability of free standing units. This document is applicable to mobile furniture, with the exception of the test described in 5.2 which is replaced by the test described in 6.7 of […]

Continue reading »

BS EN 14109:2003 – Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of potassium content by atomic absorption spectrometry

BS EN 14109:2003 - Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of potassium content by atomic absorption spectrometry

1 Scope This European Standard specifies a method for the determination of potassium contents equal to or greater than 0,5 mg/kg. This method is applicable to fatty acid methyl esters intended for addition to mineral oils. WARNING — The use of this method may involve hazardous equipment, materials and operations. This method does not purport to address to all of […]

Continue reading »

BS EN 14110:2003 – Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of methanol content

BS EN 14110:2003 - Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of methanol content

1 Scope This European Standard specifies a method for the determination of methanol content in fatty acid methyl esters (FAME) for use as diesel fuel and domestic heating fuel. The method is applicable for a concentration range from 0,01 % (m/m) to 0,5 % ( m/m ) methanol. The method is not applicable to mixtures of FAME which contain other […]

Continue reading »

BS EN 14156:2003 – Derivatives from coal pyrolysis — Coal tar based oils: Coal tar fuel — Specifications and test methods

BS EN 14156:2003 - Derivatives from coal pyrolysis — Coal tar based oils: Coal tar fuel — Specifications and test methods

1 Scope This European Standard gives the specifications of and the test methods for liquid fuels derived from coal tar. The specifications also apply to shale oil, aromatic mineral oils, and lignite tar. Preheating of liquid fuel oils according to this standard can be necessary for transport, storage, and combustion. The mixing with fuel oils from other raw materials should […]

Continue reading »

BS EN 14260:2003 – Derivatives from coal pyrolysis — Coal tar and pitch based binders and related products: road tars — Characteristics and test methods

BS EN 14260:2003 - Derivatives from coal pyrolysis — Coal tar and pitch based binders and related products: road tars — Characteristics and test methods

1 Scope This European Standard specifies the methods of test required to determine the characteristics for “road tars“ and their warning to use for the industrial purposes. Depending on the required application and the desired properties of the end product, different grades of road tars are available. 2 Normative references This European Standard incorporates by dated or undated reference, provisions […]

Continue reading »

BS EN 14266:2003 – Derivatives from coal pyrolysis — Coal tar and pitch based binders and related products: coating tar — Characteristics and test methods

BS EN 14266:2003 - Derivatives from coal pyrolysis — Coal tar and pitch based binders and related products: coating tar — Characteristics and test methods

1 Scope This European Standard specifies the methods of test required to determine the characteristics for “coating tar” used for coating. Depending on the required application and the desired properties of the end product, different grades of coating tars are available. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references […]

Continue reading »

BS EN 14350-1:2004 – Child use and care articles — Drinking equipment — Part 1: General and mechanical requirements and tests

BS EN 14350-1:2004 - Child use and care articles — Drinking equipment — Part 1: General and mechanical requirements and tests

1 Scope This part of this document specifies general and mechanical requirements for materials to be used for the manufacture of: Re-usable feeding teats and drinking accessories; Re-usable feeding bottles and drinking cups; Single-use feeding bottles, feeding teats, feeding bags and drinking accessories, which do not contain fluid when purchased. It includes test methods for the mechanical safety requirements specified. […]

Continue reading »

BS EN 14470-1:2004 – Fire safety storage cabinets — Part 1: Safety storage cabinets for flammable liquids

BS EN 14470-1:2004 - Fire safety storage cabinets — Part 1: Safety storage cabinets for flammable liquids

1 Scope This European Standard is a product specification, giving performance requirements for fire safety cabinets to be used for the storage of flammable liquids in laboratories. It is applicable to cabinets 3 , which may be free standing, restrained to a wall with a total internal volume of not greater than 1 m or mounted on wheels or castors. […]

Continue reading »
1 37 38 39 40 41 56