www.freestandardsdocuments.com collects the introduction about EN standards.The information will give you some guidance, remember to support my website.

BS EN 15380-1:2006 – Railway applications — Designation system for railway vehicles — Part 1: General principles

BS EN 15380-1:2006 - Railway applications — Designation system for railway vehicles — Part 1: General principles

The prefix sign “&” according to EN 61355 is used for designating the document type. Prefix signs for other designation tasks are given in EN 61346-2. 5 Rules for the structure of designation sets The following rules apply based on EN 61346-1 and EN 61346-2 Rule 1: The designation sets are identified by prefix signs, with their own data positions. […]

Continue reading »

BS EN 15257:2006 – Cathodic protection — Competence levels and certification of cathodic protection personnel

BS EN 15257:2006 - Cathodic protection — Competence levels and certification of cathodic protection personnel

1 Scope This European Standard defines three competence levels (Annex B) of personnel acting in the field of cathodic protection, including survey, design, installation, testing and maintenance. It specifies a framework of procedures for the training and certification for the personnel to reach and demonstrate the competence levels. It defines the minimum requirements for certification bodies responsible for this certification. […]

Continue reading »

BS EN 15060:2006 – Paints and varnishes – Guide for the classification and selection of coating systems for wood based materials in furniture for interior use

BS EN 15060:2006 - Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use

1 Scope This document provides guidance for the information to be provided by a furniture manufacturer to paint and varnish suppliers and the information to be provided by a paint and varnish supplier to furniture manufacturers, in order to assist in the selection of coating materials and coating systems for wood-based material in furniture for interior use. This standard should […]

Continue reading »

BS EN 14974:2006 – Facilities for users of roller sports equipment — Safety requirements and test methods

BS EN 14974:2006 - Facilities for users of roller sports equipment — Safety requirements and test methods

1 Scope This standard applies to facilities for users of inline-skates, roller skates, skateboards or similar roller sports equipment, as well as BMX cycles (hereinafter referred to as facility/facilities). It specifies general and specific requirements and test methods for facilities used in unsupervised areas. The purpose of this European Standard is to specify the safety requirements, which to a large […]

Continue reading »

BS EN 14866:2005 – Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications

BS EN 14866:2005 - Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications

6.3 Thermal shock resistance Test specimens for the determination of thermal shock resistance shall be prepared in accordance with ISO 2723 and shall be pre-treated and enamelled under the same circumstances as the production of the heat exchanger. They shall have an enamel layer thickness of 150 µm ± 20 µm. The thermal shock resistance shall be determined on at […]

Continue reading »

BS EN 14830:2006 – Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance

BS EN 14830:2006 - Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance

1 Scope This European Standard specifies methods of test for the resistance of the base of thermoplastics inspection chambers and manholes to external soil and ground-water pressure after installation. NOTE This is intended as a test of the durability and structural integrity of manhole and inspection chamber bases supporting product standards prEN 1 3598-2 [1 ] and prEN 1 5229 […]

Continue reading »

BS EN 14803:2006 – Identification and/or determination of the quantity of waste

BS EN 14803:2006 - Identification and/or determination of the quantity of waste

1 Scope This European Standard specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste including: safety requirements; interface requirements and performances; data to be treated and their integrity. This European Standard is applicable to systems for handling containers conforming to EN 840. NOTE Although this European Standard does not cover […]

Continue reading »

BS EN 14784-2:2005 – Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 2: General principles for testing of metallic materials using X-rays and gamma rays

BS EN 14784-2:2005 - Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 2: General principles for testing of metallic materials using X-rays and gamma rays

6 General 6.1 Protection against ionising radiation WARNING — Exposure of any part of the human body to X-rays or gamma-rays can be highly injurious to health. Wherever X-ray equipment or radioactive sources are in use, appropriate legal requirements must be applied. Local or national or international safety precautions when using ionizing radiation shall be strictly applied. 6.2 Surface preparation […]

Continue reading »

BS EN 14704-3:2006 – Determination of the elasticity of fabrics—— Part 3: Narrow fabrics

BS EN 14704-3:2006 - Determination of the elasticity of fabrics—— Part 3: Narrow fabrics

1 Scope This standard describes the test methods which can be used to measure the elasticity and related propertiesof narrow fabrics,Two methods are ilemised;ane for the purpose of product quality assurance(method A).and the olther for product performance when in use (method B). 2 Normative references The following referenced documents are indispensable for the application of this document. For datedreferences,only the […]

Continue reading »

BS EN 14673:2006 – Safety of machinery — Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

BS EN 14673:2006 - Safety of machinery — Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

1 Scope This European Standard applies to: hydraulically powered open die forging presses for hot working; handling and cooling equipment connected with the control system of the forging line, e. g., manipulators,rotating type handling devices, die shifting devices, table devices and tool changing devices; handling equipment designed specifically to be used within the forging line, e. g., material manipulation devices, […]

Continue reading »
1 31 32 33 34 35 56