www.freestandardsdocuments.com collects the introduction about EN standards.The information will give you some guidance, remember to support my website.

EN 1670:2007 – Building hardware – Corrosion resistance – Requirements and test methods

EN 1670:2007 - Building hardware - Corrosion resistance - Requirements and test methods

1 Scope This European Standard specifies the requirements for the corrosion resistance of building hardware for doors, windows, shutters and curtain walling. This European Standard provides a method of classification of corrosion resistance of building hardware based on performance in a neutral salt spray test (EN ISO 9227). This European Standard specifies requirements for both coated and uncoated surfaces and […]

Continue reading »

EN 1739:2007 – Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure

EN 1739:2007 - Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure

1 Scope This European Standard specifies methods of determining the shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete (AAC) according to prEN 12602 or lightweight aggregate concrete with open structure (LAC) according to EN 1520. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, […]

Continue reading »

EN 2335:2005 – Aerospace series – Bearings, spherical plain in corrosion resisting steel without assembly slot – Dimensions and loads

EN 2335:2005 - Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads

1 Scope This standard specifies the characteristics of spherical plain bearings in corrosion resisting steel, without assembly slot, with or without swaging groove, with or without lubrication holes and grooves, intended for use in fixed or moving parts of aircraft structure and control mechanisms. They may be used in the temperature range from – 54 °C to 150 °C. However, […]

Continue reading »

EN 2602:2005 – Aerospace series – Ports for adaptors, threaded, with lockring – Geometric configuration

EN 2602:2005 - Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration

1 Scope This standard specifies the dimensional characteristics of ports for the adaptors, threaded, with lockring,assembly with elastomer O-ring, for aerospace applications. This standard applies to all adaptors with lockring whose port end is defined by EN 2603. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited […]

Continue reading »

EN 2604:2005 – Aerospace series – 8° 30′ interface for adaptors, threaded, with lockring – Geometric configuration

EN 2604:2005 - Aerospace series – 8° 30' interface for adaptors, threaded, with lockring - Geometric configuration

1 Scope This standard specifies the dimensional characteristics of the 8°30′ interface for adaptors, threaded, with lockring, assembly with elastomer O-ring for aerospace applications. This standard applies to all adaptors, threaded, with lockring, assembled with EN 2607 to EN 2608 and used in fluid systems with a nominal pressure up to 28 000 kPa for which the principle of a […]

Continue reading »

EN 10213:2007 – Steel castings for pressure purposes

EN 10213:2007 - Steel castings for pressure purposes

1 Scope This European Standard applies to steel castings for pressure containing parts. It includes materials which are used for the manufacture of components, for pressure equipment. This European Standard relates to castings characterised by their chemical composition (see Table 2) and mechanical properties (see Tables 3 to 6). In cases where castings are joined by welding by the founder, […]

Continue reading »

EN 10333:2005 – Steel for packaging – Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption – Tin coated steel (tinplate)

EN 10333:2005 - Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate)

1 Scope This document specifies the composition of the base steel used for the production of tinplate for use in direct contact with foodstuffs or products for human and animal consumption as well as the composition of tin used to coat it. Tinplate can be produced with or without an organic coating. The main examples of use are: drinks cans, […]

Continue reading »

EN 10335:2005 – Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption

EN 10335:2005 - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption

1 Scope This document specifes the base steel to be used and the composition of the metallic coating to be used for the manufacture of lacquered elecrolytic chromium/chromium oxide coated steel and articles which, as a finished product, are intended for use in direct contact with foodstuffs or products for human or animal consumption. The main examples of use are: […]

Continue reading »

EN 13040:2007 – Soil improvers and growing media – Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density

EN 13040:2007 - Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density

5 Sampling The laboratory sample shall be obtained in accordance with EN 12579. 6 Sample reception Upon receipt of the laboratory sample, the laboratory shall confirm that the sample relates to the accompanying documentation. The sampler shall submit with the sample, at least the following minimum requirements: a) name of the client; b) to whom the results shall be reported […]

Continue reading »
1 14 15 16 17 18 56