BS EN 13894-1:2003 – Products and systems for the protection and repair of concrete structures — Test methods — Determination of fatigue under dynamic loading — Part 1: During cure

BS EN 13894-1:2003 - Products and systems for the protection and repair of concrete structures — Test methods — Determination of fatigue under dynamic loading — Part 1: During cure

1 Scope This Part of this European Standard specifies a laboratory method of testing to ascertain how dynamic loading affects strength development of structural bonding agents during curing. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are […]

Continue reading »

BS EN 13920-2:2003 – Aluminium and aluminium alloys — Scrap — Part 2: Unalloyed aluminium scrap

BS EN 13920-2:2003 - Aluminium and aluminium alloys — Scrap — Part 2: Unalloyed aluminium scrap

1 Scope This European Standard specifies characteristics, chemical composition and metal yield of unalloyed aluminium scrap with a chemical composition of not less than 99,5 % aluminium. Example Production scrap from sheet, strip, tube etc. where unalloyed aluminium is used. New and old scrap from lithographic sheet. Old scrap from various products selected to meet the specifications of this standard. […]

Continue reading »

BS EN 13920-3:2003 – Aluminium and aluminium alloys — Scrap — Part 3: Wire and cable scrap

BS EN 13920-3:2003 - Aluminium and aluminium alloys — Scrap — Part 3: Wire and cable scrap

1 Scope This European Standard specifies characteristics, chemical composition and metal yield of new and old scrap ecovered from wire or cable of unalloyed aluminium with a chemical composition not less than 99,5 % aluminium,or of defined aluminium alloys. Example New scrap from manufacturing of cables and wires. Old scrap from used aluminium cables obtained from dismantling of electrical lines. […]

Continue reading »

BS EN 13920-4:2003 – Aluminium and aluminium alloys — Scrap — Part 4: Scrap consisting of one single wrought alloy

BS EN 13920-4:2003 - Aluminium and aluminium alloys — Scrap — Part 4: Scrap consisting of one single wrought alloy

1 Scope This European Standard specifies characteristics chemical composition and metal yield of scrap consisting of one single wrought aluminium alloy. EXAMPLE Production scrap of sheet, strip, tubes, extruded or drawn profiles, ends of extrusion ingots etc. It does not apply to turnings which are covered by EN 13920-12. 2 Normative references This European Standard incorporates by dated or undated […]

Continue reading »

BS EN 13920-5:2003 – Aluminium and aluminium alloys — Scrap — Part 5: Scrap consisting of two or more wrought alloys of the same series

BS EN 13920-5:2003 - Aluminium and aluminium alloys — Scrap — Part 5: Scrap consisting of two or more wrought alloys of the same series

1 Scope This European Standard specifies characteristics chemical composition and metal yield of aluminium scrap consisting of a mix of pieces obtained from two or more wrought aluminium alloys of the same series. Examples Cuttings of sheet, strip and tube, extruded profiles, defective aluminium products. Old selected scrap. 2 Normative references This European Standard incorporates by dated or undated reference, […]

Continue reading »

BS EN 13920-7:2003 – Aluminium and aluminium alloys — Scrap — Part 7: Scrap consisting of castings

BS EN 13920-7:2003 - Aluminium and aluminium alloys — Scrap — Part 7: Scrap consisting of castings

1 Scope This European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap consisting of aluminium castings in entire or fragmented pieces. Examples Production scrap from foundries, e.g. rejected pieces and risings. Collected castings of various alloys e.g. from maintenance or dismantling of vehicles, household appliances, industrial machinery etc. Selected whole castings, e.g. pistons, wheels. 2 Normative references […]

Continue reading »

BS EN 13920-9:2003 – Aluminium and aluminium alloys — Scrap — Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials

BS EN 13920-9:2003 - Aluminium and aluminium alloys — Scrap — Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials

1 Scope This European Standard specifies the characteristics, chemical composition and metal yield of the aluminium scrap fraction obtained by flotation or other separation processes of non-ferrous shredded materials. It applies to scrap consisting mainly of aluminium castings, but also containing aluminium scrap from wrought products. EXAMPLE The aluminium fraction as obtained by flotation of the material specified in EN […]

Continue reading »

BS EN 13920-10:2003 – Aluminium and aluminium alloys — Scrap — Part 10: Scrap consisting of used aluminium beverage cans

BS EN 13920-10:2003 - Aluminium and aluminium alloys — Scrap — Part 10: Scrap consisting of used aluminium beverage cans

1 Scope This European Standard specifies characteristics, form, chemical composition and metal yield of scrap consisting of used aluminium beverage cans (UBC). Complete cans, after removal of the liquid content, even if not obtained from post-consumer collection schemes, are within the scope of this standard and are also regarded as UBC. NOTE This scrap is commercially known as UBC (Used […]

Continue reading »

BS EN 13920-11:2003 – Aluminium and aluminium alloys — Scrap — Part 11: Scrap consisting of aluminium-copper radiators

BS EN 13920-11:2003 - Aluminium and aluminium alloys — Scrap — Part 11: Scrap consisting of aluminium-copper radiators

1 Scope This European Standard specifies characteristics and chemical composition of scrap consisting of aluminium-copper radiators with a copper content sufficiently high to allow its use as alloying material in the production of aluminium alloys. Example Prepared radiators from vehicles, refrigerators or from other industrial equipment. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from […]

Continue reading »

BS EN 13920-12:2003 – Aluminium and aluminium alloys — Scrap — Part 12: Turnings consisting of one single alloy

BS EN 13920-12:2003 - Aluminium and aluminium alloys — Scrap — Part 12: Turnings consisting of one single alloy

1 Scope This European Standard specifies characteristics, chemical composition and metal yield of scrap which consists of aluminium turnings of one single wrought (EN 573-3) or cast (EN 1706) specified alloy. EXAMPLE Scalpings, millings, borings from plates, extruded profiles, castings, etc. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references […]

Continue reading »
1 36 37 38 39 40 80