BS EN 13631-11:2003 – Explosives for civil uses — High explosives — Part 11: Determination of transmission of detonation

BS EN 13631-11:2003 - Explosives for civil uses — High explosives — Part 11: Determination of transmission of detonation

1 Scope This European Standard specifies a method for the determination of the ability of cartridged explosives to transmit detonation. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to […]

Continue reading »

BS EN 13648-3:2002 – Cryogenic vessels — Safety devices for protection against excessive pressure — Part 3: Determination of required discharge — Capacity and sizing

BS EN 13648-3:2002 - Cryogenic vessels — Safety devices for protection against excessive pressure — Part 3: Determination of required discharge — Capacity and sizing

1 Scope This standard provides a separate calculation method for determining the contributing mass flow to be relieved resulting from each of the following specified conditions: vacuum insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum. Outer jacket at ambient temperature. Inner vessel at temperature of the contents at the relieving pressure; vacuum insulated vessels […]

Continue reading »

BS EN 13758-1:2002 – Textiles — Solar UV protective properties — Part 1: Method of test for apparel fabrics

BS EN 13758-1:2002 - Textiles — Solar UV protective properties — Part 1: Method of test for apparel fabrics

1 Scope This European Standard specifies a method for the determination of the erythemally weighted ultraviolet (UV) radiation transmittance of standard conditioned apparel fabrics to assess their solar UV protective properties. This method is not suitable for fabrics which offer protection at a distance such as umbrellas, shade structures or artificial sources. NOTE This standard may not be appropriate for […]

Continue reading »

BS EN 13758-2:2003 – Textiles — Solar UV protective properties — Part 2: Classification and marking of apparel

BS EN 13758-2:2003 - Textiles — Solar UV protective properties — Part 2: Classification and marking of apparel

1 Scope This European Standard specifies the requirements for marking of clothing which are designed to offer the wearer protection against solar ultraviolet radiation exposure. 2 Normative references This European standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For […]

Continue reading »

BS EN 13775-1:2003 – Railway applications — Measuring of new and modified freight wagons — Part 1: Measuring principles

BS EN 13775-1:2003 - Railway applications — Measuring of new and modified freight wagons — Part 1: Measuring principles

1 Scope This European Standard specifies requirements for measuring freight wagons and bogies. This ensures that the measuring methods are applied in accordance with uniform criteria. It applies to new and modified freight wagons and bogies. Provisions going beyond the scope of these requirements ought to be agreed upon by the contracting parties involved. The measuring methods relate to the […]

Continue reading »

BS EN 13775-5:2004 – Railway applications — Measuring of new and modified freight wagons — Part 5: Bogies with 3 wheelsets

BS EN 13775-5:2004 - Railway applications — Measuring of new and modified freight wagons — Part 5: Bogies with 3 wheelsets

1 Scope This European Standard specifies principles and requirements for measuring bogies with 3 wheelsets. This ensures that the measuring processes are applied in accordance with uniform criteria. It applies to new and modified bogies with 3 wheelsets. Provisions going beyond the scope of these requirements are generally agreed between the contracting parties involved. The measuring processes relate to the […]

Continue reading »

BS EN 13775-6:2004 – Railway applications — Measuring of new and modified freight wagons — Part 6: Multiple and articulated freight wagons

BS EN 13775-6:2004 - Railway applications — Measuring of new and modified freight wagons — Part 6: Multiple and articulated freight wagons

1 Scope This European Standard specifies principles and requirements for measuring multiple and articulated freight wagons. This ensures that the measuring processes are applied in accordance with uniform criteria. It applies to new and modified multiple and articulated freight wagons. Provisions going beyond the scope of these requirements are generally agreed between the contracting parties involved. The measuring processes relate […]

Continue reading »

BS EN 13880-8:2003 – Hot applied joint sealants — Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

BS EN 13880-8:2003 - Hot applied joint sealants — Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or […]

Continue reading »

BS EN 13892-7:2003 – Methods of test for screed materials — Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings

BS EN 13892-7:2003 - Methods of test for screed materials — Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings

4 Principle Concrete slabs surfaced with screed material and with a defined polyvinyl chloride floor covering are subjected to the repeated passages of a loaded rolling wheel. The specimen fixed to a support moves under a loaded castor wheel in two perpendicular directions at different frequencies. The movement creates normal and shear stress onto the screed material. At the points […]

Continue reading »

BS EN 13892-8:2002 – Methods of test for screed materials — Part 8: Determination of bond strength

BS EN 13892-8:2002 - Methods of test for screed materials — Part 8: Determination of bond strength

Resin based adhesive, e.g. epoxy resin or methylmethacrylate resin. Core drilling device and barrel that enable the drilling of a (50±1,0) mm cylinder through the screed. The core barrel should have a cutting edge that stands proud of the cylinder by (1,5±0,5) mm (to reduce lateral forces being applied on the test area). Diamond sawing machine that enables a cross […]

Continue reading »
1 35 36 37 38 39 80