EN 942:2007 – Timber in joinery – General requirements

EN 942:2007 - Timber in joinery - General requirements

1 Scope This European Standard specifies the general requirements including in particular the grading and classification by appearance quality of timber in joinery products or individual joinery parts. This European Standard is intended to be used at the time of manufacture of a product. However this Standard may be used to evaluate products at a later stage, but in these […]

Continue reading »

EN 959:2007 – Mountaineering equipment — Rock anchors — Safety requirements and test methods

EN 959:2007 - Mountaineering equipment — Rock anchors — Safety requirements and test methods

1 Scope This European Standard specifies safety requirements and test methods for rock anchors for use in mountaineering including climbing. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12275:1998, […]

Continue reading »

EN 1077:2007 – Helmets for alpine skiers and snowboarders

EN 1077:2007 - Helmets for alpine skiers and snowboarders

1 Scope This European Standard is applicable to performance requirements and tests for two classes of helmets for alpine skiers, snowboarders and for similar groups, including children and participants in competitions. The standard comprises two different classes of protection, class A and class B. Requirements and the corresponding methods of test, where appropriate, are given for the following:  construction […]

Continue reading »

EN 1308:2007 – Adhesives for tiles – Determination of slip

EN 1308:2007 - Adhesives for tiles - Determination of slip

1 Scope This European Standard specifies the method for the determination of the resistance to slip of a tile applied to an adhesive on a vertical surface. This European Standard applies to all ceramic tile adhesives for internal and external tiling on walls. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic […]

Continue reading »

EN 1323:2007 – Adhesives for tiles – Concrete slabs for tests

EN 1323:2007 - Adhesives for tiles - Concrete slabs for tests

1 Scope This European Standard specifies the substrate (concrete slab) to be used for the determination of the properties of adhesives for tiles. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc), if […]

Continue reading »

EN 1346:2007 – Adhesives for tiles – Determination of open time

EN 1346:2007 - Adhesives for tiles - Determination of open time

1 Scope This European Standard specifies the test method for the determination of the open time of ceramic tile adhesives. This European Standard is applicable to all ceramic tile adhesives for internal or external tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic […]

Continue reading »

EN 1347:2007 – Adhesives for tiles – Determination of wetting capability

EN 1347:2007 - Adhesives for tiles - Determination of wetting capability

1 Scope ‘This European Standard specifies the method for the determination of the wetting capability of ceramic tile adhesives. This European Standard is applicable to all ceramic tile adhesives for internal or external tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile […]

Continue reading »

EN 1348:2007 – Adhesives for tiles – Determination of tensile adhesion strength for cementitious adhesives

EN 1348:2007 - Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

1 Scope This European Standard specifies a method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives. This European Standard is applicable to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design […]

Continue reading »

EN 1486:2007 – Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting

EN 1486:2007 - Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting

1 Scope This European Standard considers requirements for the protection of the whole body including head, hands and feet. Clothing for head and feet according to this European Standard, however, may only provide sufficient protection when worn together with such basic PPE specified in the relevant standards as noted in paragraphs 4.2 and 4.4 of this European Standard. This European […]

Continue reading »

EN 1497:2007 – Dispositivi individuali per la protezione contro le cadute Imbracature di salvataggio

EN 1497:2007 - Dispositivi individuali per la protezione contro le cadute Imbracature di salvataggio

1 Scope This European Standard specifies requirements, test methods, marking and information supplied by the manufacturer for rescue harnesses. Rescue harnesses conforming to this European Standard are used as components of rescue systems, which are personal fall protection systems. Rescue harnesses are not intended to be used as body holding devices in fall arrest systems. 2 Normative references The following […]

Continue reading »
1 13 14 15 16 17 80