EN 15519:2007 – Paper and board intended to come into contact with foodstuffs – Preparation of an organic solvent extract

EN 15519:2007 - Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract

1 Scope This European Standard specifies a test method for the assessment of substitute tests performed with volatile test media for the determination of migration from paper and board intended to come into contact with fatty foodstuffs at all temperatures and for any period of time. NOTE At the time that this European Standard was prepared, the EU directives for […]

Continue reading »

EN 15550:2007 – Animal feeding stuffs – Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion

EN 15550:2007 - Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion

1 Scope This European Standard specifies a method for the determination of the elements cadmium and lead in animal feeding stuffs by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion. The method limit of quantification for each element is dependent on the sample matrix as well as the instrument. For cadmium a limit of quantification of 0,05 mg/kg should […]

Continue reading »

EN 15558:2009 – Fertilizers – Determination of nitric and ammoniacal nitrogen according to Ulsch

EN 15558:2009 - Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch

1 Scope This European Standard specifies a method for the determination of nitrate and ammoniacal nitrogen with reduction according to Ulsch. The method is applicable to all nitrogenous fertilizers, including compound fertilizers, in which nitrogen is found exclusively in nitrate form, or in ammoniacal and nitrate form. 2 Normative references The following referenced documents are indispensable for the application of […]

Continue reading »

EN 15559:2009 – Fertilizers – Determination of nitric and ammoniacal nitrogen according to Arnd

EN 15559:2009 - Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd

1 Scope This European Standard specifies a method for the determination of nitric and ammoniacal nitrogen with reduction according to Arnd (modified for each of the variants a, b and c). The method is applicable to all nitrogenous fertilizers, including compound fertilizers, in which nitrogen is found exclusively in nitrate form, or in ammoniacal and nitrate form. 2 Normative references […]

Continue reading »

EN 15652:2009 – Foodstuffs – Determination of niacin by HPLC

EN 15652:2009 - Foodstuffs - Determination of niacin by HPLC

1 Scope This European Standard specifies a method for the determination of the mass fraction of niacin in foodstuffs by high performance liquid chromatography (HPLC) by three different ways of hydrolysis, acid hydrolysis (A), enzymatic hydrolysis (B) or acid/alkaline hydrolysis (C). The method has been validated in interlaboratory tests on fortified and non-fortified samples such as breakfast cereal powder, chocolate […]

Continue reading »

EN 15653:2009 – Packaging – Flexible aluminium tubes – Test method to check the resistance of the internal protective coating against ammonia

EN 15653:2009 - Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia

1 Scope The ammonia test is a quick test to check the chemical resistance of the internal protective coating of aluminium tubes. The test is used for flexible aluminium tubes for ammonia containing fillings and as an introductory test for newly developed internal protective coatings. 2 Test device / media – Aqueous solution of ammonia with a mass fraction of […]

Continue reading »

EN 15655:2009 – Ductile iron pipes, fittings and accessories – Internal polyurethane lining for pipes and fittings – Requirements and test methods

EN 15655:2009 - Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods

1 Scope This European Standard defines the requirements and test methods applicable to factory applied internal polyurethane high duty corrosion protection of buried ductile iron pipes and fittings conforming to EN 545,EN 598 and EN 969 for use at permanent operating temperatures up to 45 °C. 2 Normative references The following referenced documents are indispensable for the application of this […]

Continue reading »

EN 15692:2009 – Ethanol as a blending component for petrol – Determination of water content – Karl Fischer potentiometric titration method

EN 15692:2009 - Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method

1 Scope This European standard specifies a method for the direct determination of water in ethanol to be used in gasoline blends. It is applicable in the range 0,05 % (m/m) to 0,54 % (m/m). NOTE For the purposes of this European Standard, the term “% (m/m)” is used to represent the mass fraction. WARNING — Use of this standard […]

Continue reading »

EN 15706:2009 – Hardware for furniture – Strength and durability of slide fittings for sliding doors and roll fronts

EN 15706:2009 - Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts

1 Scope This European Standard EN 15706 specifies test methods and requirements for the strength and durability of all types of slide fittings for all types of sliding doors and roll fronts sliding horizontally and vertically and their components for all fields of application. The tests consist of the application of loads, forces and velocities simulating normal functional use, as […]

Continue reading »
1 10 11 12 13 14 80