BS EN ISO 11111-3:2005 – Textile machinery — Safety requirements — Part 3: Nonwoven machinery

BS EN ISO 11111-3:2005 - Textile machinery — Safety requirements — Part 3: Nonwoven machinery

1 Scope This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1, ISO 11111-2, ISO 11111-6 and ISO 11111-7. It specifies significant hazards and corresponding safety requirements and/or measures for nonwoven machinery. By taking into account the scope of ISO 11111-1 as far as is relevant, this part of ISO 11111 is applicable to all machinery, plant and related equipment intended to be used for opening, cleaning, blending, carding, needle punching, cylinder drying and batching, as specified in Clause 5.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 9902-1, Textile machinery — Noise test code — Part 1: Common requirements
ISO 9902-2, Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
ISO 9902-3, Textile machinery — Noise test code — Part 3: Nonwoven machinery
ISO 9902-6, Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery
ISO 9902-7, Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery
ISO 11111-1:2005, Textile machinery — Safety requirements — Part 1: Common requirements
ISO 11111-2:2005, Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machinery
ISO 11111-6:2005, Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery
ISO 11111-7:2005, Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery
ISO 13852:1996, Safety of machinery — Safety distances to prevent danger zones being reached by the upper limbs
3 Terms and definitions
For the purposes of this part of ISO 11111, the terms and definitions given in ISO 11111-1 apply.
4 List of significant hazards Significant hazards found in nonwoven machines which are common with those frequently occurring with other textile machines or with machine elements of other textile machines shall be considered in accordance with ISO 11111-1:2005, Clauses 5 and 6, whenever referred to under the heading “General safety requirements” in Clause 5 of this part of ISO 11111. Significant hazards which are particular to nonwoven machines are considered as “Specific hazards” in Clause 5 of this part of ISO 11111. Before using this part of ISO 11111, it is important to carry out a check to ascertain that the specific machine has the significant hazards identified.
NOTE The significant hazards of nonwoven machines are always considered in conjunction with safety requirements.
5 Significant hazards and corresponding safety requirements and/or measures
5.1 General Machinery shall conform to the safety requirements of ISO 11111-1:2005, Clauses 5 and 6, whenever referred to under the heading “General safety requirements” of this Clause 5 and shall conform to the additional “Specific safety requirements” of this Clause 5.
BS EN ISO 11111-3:2005 – Textile machinery — Safety requirements — Part 3: Nonwoven machinery

Leave a Reply

Your email address will not be published. Required fields are marked *